BIM and Integrated Design

Search This Blog

Concept Pavilion from Milan Expo

Posted by Jalal Semaan

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

If you would like to know more about this technique, please contact us at parabimblog@gmail.com

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Comments

Parametric Folding Panels in Revit and Dynamo

Parametric Folding Panels in Revit and Dynamo Download the Sample Data-sets here In the Applications menu, go to New > Family, select "Curtain Panel Pattern Based" and click Ok. Select the blue grid in the background, and change the grid dimensions to 2500 for Horizontal Spacing and 7000 for Vertical Spacing. (See below image) Start by hosting two points on the default reference lines as denoted in the below image. Multiple-select the two new points; in the Properties menu, click the drop down menu to the right of the "Measurement Type" parameter and change it from "Normalized Curve Parameter" to "Segment Length". Set the segment length to 5800mm. In the Properties Menu, click the small button to the right of the "Segment Length" parameter (See below red arrow). The "Associate Family Parameter" will open. Click on "Add Parameter", make a new instance Parameter, call it

Modelling Membranes in Revit: The Facade of King Fahd Library in Riyadh

Photo Source ArchDaily This tutorial was inspired by one of the most important buildings in Saudi Arabia. The cladding system is made up of rhomboid textile awnings, marked by its play with revealing and concealing. Inserted white membranes, supported by a three-dimensional, tensile-stressed steel cable structure, act as sunshades and interpret the Arabian tent structure tradition in a modern, technological way. (See below image) Photo Source ArchDaily 01. In the Applications menu, go to New > Family, select "Curtain Panel Pattern Based" and click Ok. Select the blue grid in the background, and click on the Type Selector and change the grid type to "Rhomboid". Save As the family and proceed. Select the blue grid again, in the properties menu, change the Horizontal Spacing to 3000 and the Vertical Spacing to 4000. (See below image) 02. Place a single reference point on the xy-plane of the adaptive points no. 1, 2 and 3. Sele

ParaBIM Projects - Download and Learn

Downloadable Revit and Dynamo Projects Click here to Browse our Catalogue

Powered by Blogger

Concept Pavilion from Milan Expo

If you would like to know more about this technique, please contact us at parabimblog@gmail.com

Comments

Post a Comment